Bobcat E20 W4404 Error Code
W4404 Error Code
Manbasket mode : GACD controller no communication on CAN Bus is the main cause of W4404 error.The condenser converts gases into liquids, which expels heat from your rig. Materials can build up over time, causing a layer of dirt and grime to form on the condenser's coils. Your AC system will only blow hot air since the refrigerant fails to cool down.
Tip For E20 Model
The overload warning device (if equipped) senses
hydraulic pressure in the boom lift circuit. When the
hydraulic pressure in the boom lift circuit reaches a
predetermined pressure setting, a buzzer will sound that
indicates an overload condition.
If the buzzer sounds, immediately move the arm closer to
the excavator and lower the boom. Reduce the size of the
load before attempting to re-lift the load.